1.本机主要用于生产皮靴时将鞋帮面压弯及定型。

The machine is mainly used for bending and shaping the upper of leather boots.

2.本机采用液压及气压驱动，利用热力及压力将鞋帮面压弯及定型，形成皮靴所需之弯曲形状。

The machine is driven by hydraulic pressure and air pressure. The upper surface of the shoe is bent and shaped with heat and pressure to form the bending shape of leather boots.

3.按不同皮料的厚薄 及材质，调整压力的大小，加热的温度及压着定型的时间，从而获得最佳的定型效果。

Adjust the pressure, heating temperature and pressure setting time according to the thickness and material of different leather materials to obtain the best setting effect.

4.左右侧压板及压板之加热温度可做独立调整，以适应不同的皮料特性。

The heating temperature of the left and right side platens and platens can be adjusted independently to adapt to different leather characteristics.

5.外置式的压板行程调整，以便利调整所需的行程。

External pressure plate travel adjustment to facilitate the adjustment of travel.

6.本机设有二次压力功能，使用一次压力减压下降，减少鞋面破裂，二次加压使靴面光泽度更佳。

The machine is equipped with the function of secondary pressure, which can reduce the pressure with the first pressure, reduce the breaking of the vamp, and make the glossiness of the boot better with the second pressure.